POWER PUSH PARTS English

Can be attached to a genuine ECU with a couplar on.
Various 3D correction maps for our special engine parts are initialy set and can be easily upload with personal computer or smartphone.
The built-in map can be finely adjusted for each opening throttle and engine speed.
Fuel control adjusting can be made while monitoring your PC or smartphone with bluetooth.

商品詳細

FI CON TYPE-e (injection controller)

FI CON TYPE-e (injection contr...

税込価格 62,700 円
対応車種 GROM(JC75)
:GROM(JC75-1000001〜)
品番 05-04-0116

Function1

■Preset MAP
You can select 13 preset fuel adjustment maps that have been set according to the engine specifications.
You can easily change the settings using your PC or smartphone.

■Warning
Various settings needs higher knowledge, for expert use only.
If you have any problem or question about the contents, please do not work on your own, consult a dealer with skilled mechanics.
Basically, setting should be done in a factory equipped with a chassis dyno-meter and O2 sensor.
Never perform setting with your smartphone while driving. It is very dangerous.

Function2

■Can be attached to a genuine ECU with a couplar on.

■Fuel injection duration adjustment
It can be adjusted between a maximum increase value of 5000 μ s and a maximum decrease value of 7500 μ s on each 500rpm engine speed and every 5% throttle opening angle.

Function3

■Simultaneous monitor with engine temperature display function
The dedicated software for PC or smartphone has a simultaneous
monitor function In addition to the tachometer screen and throttle opening graph screen that are very convenient for setting, the fuel injection rate of the engine temperature injector is also digitally displayed.

■Real search function
Connect to a PC or smartphone with the engine started.Information of the running engine is reflected on the screen of the computer or smartphone at the same time.The reading speed / throttle opening is reflected in the mass of the fuel map graph, and that high-lighted to make the adjustment point clear and very convenient for setting.

Function4

■Rev limit function
You can set the Maximum engine speed.It's other than that limiter-cut, it can be set even at low speed.It can be used effectively when you don't want to increase the engine speed, such as tuning engine rev measures and break-in.

■Digital acceleration pump
This product monitoring the speed of the accelerator opening by TPS signal.
When the rider wants quick acceleration and the throttle is opened quickly, injection asynchronously the increase injection other than that set value.
The similar function as the acceleration pump」of the racing carburetor.

Function5

■Pit lane limiter function
In addition to the above rev limit function, if you do not want to increase the engine speed such as pit lane speed regulation etc.,the limiter can be operated only when the“ON”by connecting the additional bottom switch (to the white lead in the spiral tube of the main unit and grounding the body)
※ Please provide extending wire to the switch.

■Tachometer output lead wire.
1 revolution, 1 pulse, 5 volts is output in purple lead wire in the spiral tube of the main unit.
※When installing, the bracket harness needs to be modified.

Table below for compatible products that have been confirmed as of April 2020.
Medium DN Tachometer T2 (White LED)(05-05-3210)
φ 48 Small DN Tacho & Thermometer(05-05-0016)
φ 48 Small DN Tachometer(05-05-0035)
Medium LCD Speed & Tachometer (MLCD ST1)(05-05-0028)
Blue LED electrical Tachometer(05-05-0004)
Black & Green electrical Tachometer(05-05-0014)

Note

◎ Not compatible parts
H.I.D kits and LED headlights kit made other than Takagawa. :The ballast / inverter (voltage converter) generates high-voltage noise that adversely affects the digital circuit, and may cause product failure or malfunction.
Do not use an performance ignition device (ignition coil or plug wire) as it may cause malfunction or product failure due to increased radiation noise associated with increased ignition voltage.
It is possible to use it with Takagawa's hyper ignition coil. Do not use other performance generator or similar products, it may cause a malfunction due to insufficient power generation or voltage waveform.

◎The computer or smartphone require the following conditions.
Windows 7/8/10 (Without RT/MOBILE)
You must be connected to the internet to install our software (free).
Your computer has built-in Bluetooth or external Bluetooth adapter.
Microsoft Windows Bluetooth drivers can be connected.

If you are using Windows 10 and updated to the major update “April 2018 Update (1803)”which performed in April 2018, After this update, Bluetooth communication will not work.
Please refer to the countermeasure manual to solve this problem.
Click here for Countermeasure manual

iOS iPhone4s or later, iPad 3rd generation or later iOS9 or later.
Please get our application and purchase the data though AppStore.
After installing the FI CON TYPE-e app (free), you need to purchase various model data within the app.

The iOS updating may cause some malfunctions.
Target iOS:iOS13、iOS13.1、iOS13.1.2
Currently, we are trying solve this problem.

Andoroid Andoroid OS 4.2.2 or later. Bluetooth function bailt.
You need to connect to Google play to install our app and purchase model data.
After installing the FI CON TYPE-e app (free), you need to purchase various model data within the app.

■FI CON TYPE-e software and application download page
Click here for FI CON TYPE-e software and application download page

↑To top