POWER PUSH PARTS English Monkey125(JB03)

The ”S stage α bore up kit” comes with ”FI con TYPE-X” and a large capacity injector with ”S stage bore up kit”.

商品詳細

S-Stage α Bore Up Kit 145cc

S-Stage α Bore Up Kit 145cc

税込価格 140,360 円
対応車種 Monkey125(JB03)
Monkey125(JB03-1000001~)

Only for Monkey125 (JB03) ,which is Japanese domestic official model.
Can not be used with Monkey125(Thailand model)(MLHJB03).
品番 01-05-5462

S-Stage α Bore Up Kit 145cc S-Stage Bore Up Kit 145cc(N-10 Sports camshaft)

S-Stage Bore Up Kit 145cc(N-10 Sports camshaft)

This bore up kit that can be changed the displacement from stock 124cc to 145cc.
By installing with FI CON TYPE-X (injection controller), it realizes more output torque than stock.
The cylinder adopts an aluminum steel sleeve cylinder.

Bore diameter: 54mm,
compression ratio 11.2:1,
Stroke 63.1mm (same as stock)

SP TAKEGAWA M5 temperature sensor (optional) can be attached to the cylinder, to measure the cylinder temperature. (with compact LED thermometer)

S-Stage α Bore Up Kit 145cc N-10 Sports camshaft

N-10 Sports camshaft

The optimum profile that maximizes the performance of the stock cylinder head improves the output performance.
By installing it on a stock engine, the output in the high rpm range will be improved.
Relocating the stock decompression system to the sports camshaft will be auto decompression system.

■Optional parts:N-20 Sports camshaft
Now you can enjoy the performance on different driving occasions by exchanging our special parts.

S-Stage α Bore Up Kit 145cc FI CON TYPE-X

FI CON TYPE-X(injection controller)

■FI CON TYPE-X
Injection controller that can be installed on a genuine ECU with a simply connector on.
Preset MAPs that have been set by our factory to match the our basic specifications, so simply select the MAP of your bore-up kit or throttle body with your cellphone or PC to complete the basic operation to get running.
In addition, ignition timing, acceleration pump, dwell time, invalid injection time, ignition timing temperature correction, engine temperature correction, vaporization time can be set.
Based on the preset MAP, that can be set according to your preference and creating a new MAP to enjoyed even expert customers.
It can be connected to a PC or cellphone while the engine is running, allowing you to monitor the engine temperature in addition to the tachometer screen and cost safety graph screen that are very convenient for mapping.
You can choose from two types of mode for PC software and cellphone application, from EASY mode or EXPERT mode respectively.
EASY mode-The stock ECU ignition map can be used.
Can be set advance or retard based on stock ignition timing.
You can select from 14 preset data.
EXPERT mode
Ignition timing will be set without performing advance / retard (crank angle of BTDC) for the stock ignition MAP. In the EXPERT mode, there is an「engine temperature ignition timing correction function」if the engine temperature becomes too high, that corrects that the vaporization time and combustion time change to avoid affects the ignition timing.
Preset data is available from 9 patterns.
In addition, it is equipped 1) rev limit:convenient for engine protection and breaking-in, 2) Pit lane limiter: that is assumed to be used in a pit lane with a speed limit 3)On-time MAP change function :Switch between power mode and fuel consumption mode that can be used from beginners to expert rider.
Requirement:FI CON TYPE-e using with computer mobile or smartphone. Caution:Must meet the following conditions.
To download software and applications, it is necessary to be connected to the Internet. Paid for apps.

To the detail page of FI CON TYPE-X

Note

■About our “Bore Up Kit” installation
By installing the “SP TAKEGAWA Bore Up Kit”, the engine output and torque will be greatly increased, so the load on the crankshaft will increase torsion and deflection.
We recommend installing the “crankshaft support adapter” at the same time to reduce the load on the crankshaft.
The “crankshaft support adapter” adds ball bearing support to the end of the crankshaft on the flywheel side, suppressing twisting and bending, and increasing the durability of the crankshaft.
■Crankshaft Support Adapter for Monkey(JB03) item No.01-10-0150


Requirement:FI CON TYPE-X using with computer mobile or smartphone. Caution:Must meet the following conditions.
To download software and applications, it is necessary to be connected to the Internet. Paid for apps.

Since the HID kit or other company's LED headlight can cause failure by high voltage noise, please do not use simultaneously.
Ignition system of goods outside the company (ignition coil and plug cord) is associated with the up of the ignition voltage, please do not use it can cause malfunction or failure of the product due to the increase of radiation noise.
The power generator of goods outside the company due to differences in shortages and voltage waveform of the power generation amount, it will be the cause of failure, please do not use.

■FI CON TYPE-X details page
To the detail page of FI CON TYPE-X

■FI CON TYPE-X software and application download page
Click here for FI CON TYPE-X software and application download page

関連商品

↑To top